ISIS does not terminate if ESTRY unstable

[Ellie Charles 0]

Hello

 

I have an ISIS-TUFLOW model with ESTRY channels that link to TUFLOW (but not ISIS).

When the model becomes unstable in the ESTRY component the ISIS run does seem to acknowledge that the TUFLOW component is no longer valid and it just sits while ISIS continues.  CTRL+C will not terminate the TUFLOW component and formally closing from ISIS is not reliably an option. 

The general outcome being that final results files may not generated in the ESTRY TUFLOW component making trouble shooting more difficult.

When running a batch this also means that the next run cannot start without manual intervention. 

 

Can this be addressed?

 

Thanks,

 

Ellie

[rachel.jensen 0]

Hi Ellie,

 

This sounds like an issue that is best resolved if support have a look at the model.

Could you please make a copy of the model, zip it up and send it though to support@tuflow.com

Unfortunately, due to the ISIS elements, you will have to manually copy all input files and cannot use the -c switch in the batch file.

 

If the model is too large to email please let us know and we can organise a FTP site for you.

 

Thanks,

 

 

 

Rachel

[Ellie Charles 0]

Rachel

 

It is a pretty hefty model so can you send appropriate FTP arrangements?

 

Thanks

 

E