Jump to content
TUFLOW Forum
sachi

converts_to_ts1 bug when using e0 and wildcard flag

Recommended Posts

We've run into a bug in convert_to_ts1 (2012-06-AA) utility.  This bug is identical to the one outline in this thread from 2007: 

As explained in the old thread, when converting to a ts1 file, a value is randomly added to end of the hydrograph when using the e0 and * wildcard. We were using the following batch file command:
                    convert_to_ts1.exe -wbnm -ts1 -b -e0 *Meta.out              

After some testing we've found the bug only occurs for us when running the utility on our external NAS drives. It is also noted that the value added to the end of the hydrograph is different depending on which NAS it is run on! The error does not appear to be occurring when running the utility on local drives of fast server storage (SAN).

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...