Jump to content
TUFLOW Forum
Samir A

Storage width and Effective flow width

Recommended Posts

Hi Samir,

Effective Flow Width differs from Storage Flow Width in that it takes into consideration the effects of varying manning's 'n' across the cross-section. Effective Flow Width is only going to be different from Storage Flow Width when considering channel types such as open channels where Manning’s n varies across the channel.

For open channels, the Effective Flow Width is used to extend the cross-section conveyance properties if the water level exceeds the highest elevation in the cross-section, and similarly, the Storage Flow Width is used to extend the surface area (storage) of the connected nodes for water levels above the top of the cross-section (providing the 1d_nwk UCS – Use Channel Storage – flag is true).  Hydraulically, cross-sections and nodal area tables are extended indefinitely on this basis.

The Depth Limit Factor’s primary role is to set the maximum depth in a channel for detecting an instability – it plays no role in the hydraulic computations. Some modellers use it for quality control to stop a simulation should the water level in a channel or node exceed the highest elevation in the channel cross-section or nodal area table by triggering a forced instability.  This is done by specifying “Depth Limit Factor == 1” and is useful if the modeller wants to make sure that the calculated water levels never exceed the data input for cross-sections and any nodal area tables.  If it does exceed then this would indicate the need to obtain/extract/extend the data for the exceeded locations.

Please read Section 5.10 and Appendix B page 6 - 7 of the 2016 TUFLOW manual for more details. 

Thanks, Ellis

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...