Tuflow link

[cjeanne 0]

Using the 'Tool COnfiguration' within UltraEdit I've successfully ESTRY 2007-07-BE, TUFLOW 2007-07-BF and TUFLOW 2008-08-AF-iDP. However, although I've linked UltraEdit to TUFLOW 2009-07-AD-iDP and TUFLOW 2009-07-AE-iDP, I have the following meesage when running tuflow using these.

"The system cannot execute the specified program."

How do I get both the pre 2009 and 2009 versions to work?

[Anne Kolega 0]

Hi Caroline,

You can use a *.bat -file to start TUFLOW; see section 5.6 (Batching Simulations using a Batch File) of the Manual.

Cheers

[cardno 0]

If it's not working from UltraEdit, it will not work from a batch file either. Are you using the latest Dongle Drivers?

[RhysHJ 0]

Hi Caroline,

Are you able to run TUFLOW by double-clicking the executable from windows explorer? If you get an error message when you try this, but you are able to run the 2007 version, it might have something to do with the windows driver dependencies I identified in this post:

http://www.tuflow.com/forum/index.php?showtopic=411

I have found several times that new releases of TUFLOW will not run on some of our PCs without installing the latest .NET framework first. I'd be interested to know if this solves your problem too.

Kind Regards

Rhys

[cardno 0]

Please see http://www.tuflow.com/forum/index.php?showtopic=639

[Bill Syme 0]

Thanks Guys - very likely all on the right track!

Caroline, let us know how you went.

Cheers

Bill

[cjeanne 0]

That's guys. most appreciated.

Problem sorted... panick over!